The Futurepump SF2

Technical Specifications


At shallow heads, the Futurepump SF2 can deliver up to 1 l/s, which is 3,600 l/hr (120W).

– Inlet side vertical suction limit: 7 metres
– Maximum total vertical lift: 15 metres
– Horizontal discharge: 500m+


– Maximum pump voltage: 60V DC
– Maximum motor current: 5 amps DC
– Piston diameter: 104mm
– Inlet/outlets designed for 11/4 (32mm) pipe
– Displacement volume per stroke: 150cm3
– Normal flywheel RPM range: 100-250 rpm
– 90mm pulley gear for 0–8m pumping heads
– 50mm pulley gear for >8m pumping heads

Remote Monitoring

Every Futurepump SF2 pump includes remote performance monitoringat no extra cost.

– Minute-by-minute monitoring of pump vital signs -technical data displayed on a web dashboard accessible to distributors
– Monitoring of pump utilisation, including litres of water pumped, potential area irrigated, fuel savings, kWh produced
– Pump geo-location trackingusing google maps

Pay-As-You-Go Ready

– PAY-AS-YOU-GO Ability for remote on-off switching (in seconds)
– Software integrations with leading PAYG management and billing platforms including Angaza, Lumeter and other proprietary systems.

Weight and Dimensions

– Pump weight:19.5kg
– Pump dimensions: 520mm x 530mm x 200mm

– Complete carton weight (including 80W PV and suction pipe): 36.7kg
– Carton volume: 0.150 CBM

– Supplied flexible inlet/suction pipe: Internal diameter of 31.8 mm, external diameter 38.8mm. 6000mm length

Spare Parts & Tools

Toolkit: Three sizes of spanner, double ended screwdriver. Complete disassembly and reassembly possible with these tools

3 x spare transmission belts
3 x spare piston seals
4 x adjustable hose clips
2 x 11/4 inch pipe couplers
2 x 11/4” ->11/2inchreducers
1 x inlet filter/strainer
1 x pack stuffing box graphite packing rope
1 x complete set of spare o-ring seals

Stockists & Pricing

To find your nearest SF2 stockist and local pricing, please visit www.futurepump.com. For information on becoming a distributor in your country, please visit www.futurepump.com/distribute

Futurepump Ltd is proudly supported by Practica, iDE, USAID Powering Ag, AECF, REEEP and Village Capital.

Warranty & Certification

The SF2 is supplied with a full five year manufacturer-backed warranty, which means servicing and parts will be provided free of charge to our customers over that period through our network of certified distribution partners.

The best support can be provided by warranty regsitration upon purchase via http://warranty.futurepump.com

The SF2 is manufactured in India by Futurepump in our factory which uses an ISO 9001:2015-certified quality management system.

Other Languages

– Trouvez la spécification technique en français ici

– Encuentra detalles técnicos en español aquí

Get the Futurepump SF2 solar pump PDF data sheet

Case study: Japheth

Japhed has tried everything from manual labour to petrol pumps. Now the Futurepump SF2 is bringing him water in the dry season.

Meet a farmer: Japheth from Okana, Kisumu County

“I used to irrigate with buckets but I could not do much because the bucket capacity is very small. I tried a MoneyMaker pump but it was so labour intensive that I ended up spending much money hiring people just to help me pump the water. I also tried petrol, but I would use 1000 shillings ($10) a day – this cost is too high.

So, if I didn’t have the Futurepump, I think I wouldn’t be here now in the dry season because it is already too hot. But with the Futurepump now I know I will harvest something good.”